Green A frame swing set kit with two seats

You pick up the top beam and the four legs from your local yard, and we supply the metal that ties them together. The box has the green end brackets, the swing hangers with sealed bearings, and two soft seats with coated chain. Lay the timber out flat on the lawn before you start boring holes.

Cast aluminum brackets

We cast these brackets in one piece without welded seams. The sleeves slide over the top beam and the splayed legs so you can run your lag screws straight in without fighting an odd angle.

Bearings inside the hangers

Metal rubbing against metal makes that dry yard squeak everyone knows. We press a sealed bearing into each hanger so the swing moves quietly on the beam through wet springs and dry summers.

Coated chain and seats

The two flexible seats come with zinc plated chain already attached. A smooth sleeve covers the lower links where hands grip, so bare fingers do not get pinched while someone is swinging.

What you still supply

You need five pieces of lumber from the local yard and a good socket set. Measure your yard space first so you know how long to cut the legs before you bolt on the brackets.

Anchoring the frame