Swing set brackets

Green A frame brackets with four hangers

Two end brackets and four hangers in green powder coat give you the metal skeleton for a frame with two swings.

Rated 4.1 of 5585 ratings on the listing

That count belongs to the listing as a whole. The other colours and sizes on it share the same total, so it is not a tally for this box alone.

Blue A frame brackets with four hangers

Pink A frame brackets with four hangers

Material	Aluminum alloy, one piece mold, painted
Fits	Top beam 5.5 x 3.5 in. actual (4x6 nominal), four legs 3.5 x 3.5 in. actual (4x4 nominal)
In the pack	Two brackets and four hangers
In the box	Two brackets, four hangers, 28 bolts and 28 washers
Not in the box	Lumber
Build time	20 minutes for the frame, 10 for the hangers
Goes on	Building an A frame.

$69.98

In stock

Noted on the live listing in October 2026. The listing has the final say.

A pile of lumber turns into a swing set once these go on the ends. We cast the brackets as single pieces without weld seams, then pack them with four matching hangers and the through-bolts. You supply the posts, the top beam, and the drill bits.

Single piece castings

Each bracket comes out of the mold in one piece. There are no welded seams along the corners to split under rain, and the green finish covers the alloy entirely.

Drilling the posts

Slide the top beam through before fitting the legs. Mark your spots through the cast holes, run an electric drill through the timber, and tighten the included bolts with a wrench.

Four matching hangers

The pack includes four hangers for two swing seats. Each one houses a sealed bearing so the swing moves quietly without the iron-on-iron squeak of an open eye bolt.

Lumber to gather

The box has the brackets, hangers, washers, and bolts. You buy the lumber locally so you can choose straight, dry timbers that slide into the sleeves without force.

Anchoring the frame