Swing set brackets

Blue A frame brackets with four hangers

A pair of blue brackets and four bearing hangers give you the metal half of an A frame swing set built for two seats.

Rated 4.1 of 5585 ratings on the listing

That count belongs to the listing as a whole. The other colours and sizes on it share the same total, so it is not a tally for this box alone.

Green A frame brackets with four hangers

Blue A frame brackets with four hangers

Pink A frame brackets with four hangers

Material	Aluminum alloy, one piece mold, painted
Fits	Top beam 5.5 x 3.5 in. actual (4x6 nominal), four legs 3.5 x 3.5 in. actual (4x4 nominal)
In the pack	Two brackets and four hangers
In the box	Two brackets, four hangers, 28 bolts and 28 washers
Not in the box	Lumber
Build time	20 minutes for the frame, 10 for the hangers
Goes on	Building an A frame.

$71.99

In stock

Noted on the live listing in October 2026. The listing has the final say.

You supply the lumber from the yard down the road, cut square and dry. We cast the brackets in aluminum without welded joints, coat them in blue, and include four hangers with the bolts and washers for both ends. Slide the top timber into place before you set the legs.

Casting without weld joints

We cast each bracket as a single piece of aluminum alloy rather than welding cut plates together. The metal wraps around the beam sleeve and the leg sockets with thickened rings around the precast bolt holes.

Four hangers included

The kit includes four aluminum swing hangers with sealed bearings for two seats. Mounting them along the top beam takes an electric drill and the bolts from the box, with enough hardware to set both ends.

Drill before you tighten

Slide your wood through the sleeves while the beam rests on horses. Pilot every hole through the metal openings before turning the bolts down with a hand wrench, so the wood does not bind in the socket.

Blue protective finish

The smooth blue coating seals the metal against rain and dirt across the seasons. Washers sit flat against the painted faces without chipping the outer layer when you seat the bolts into the frame.

Anchoring the frame