Tortilla press
Green 8 inch adjustable tortilla press
Cast aluminum tortilla press in light green with an adjustable center column, internal bearing, and four removable spacer gaskets.
Rated 4.1 of 5837 ratings on the listing
That count belongs to the listing as a whole. The other colours and sizes on it share the same total, so it is not a tally for this box alone.
| Material | Cast aluminum with a bearing in the adjustment column |
|---|---|
| Fits | 8 in. plate |
| Thickness | 1/16 in. bare, then 1/8, 1/6, 1/4 and 3/8 in. with the gaskets |
| In the pack | One press |
| In the box | Press and four thickness gaskets |
| Not in the box | Parchment or patty paper, which you do need |
| Goes on | . |
Noted at our retail partner in September 2026. The live listing has the final say.
Set the dough ball on the plate, drop the handle, and the top casting comes down flat. We cast the body from aluminum and put a bearing into the adjustment column so the lever swings smooth. A set of loose gaskets changes the finished round from paper thin to a heavier crust.
Adjustable gasket stack
Four separate gaskets sit around the center pin. Leave them off for thin flatbreads or stack them up when you want thicker dough for arepas, rotis, or small pie crusts.
Bearing in the column
A small bearing inside the main pivot keeps the top plate moving flat against the bottom. The handle turns without grinding metal against metal or binding mid pull.
Parchment sheets required
Keep two squares of parchment or wax patty paper on hand at the counter. Place one sheet under the dough and one on top before pressing to keep the aluminum clean.
Light green casting
The base and handle are cast aluminum with a smooth light green surface finish. It wipes down with a damp cloth after you finish pressing rounds for dinner.
Green 8 inch adjustable tortilla press, at our retail partner in a new tab.